Battery operated home smoke alarms - have saved thousands of lives !

Battery operated home smoke alarms detect both smoke and carbon monoxide. Smoke Alarm is one of the most important fire safety devices for the home. The primary job of our smoke alarm is to protect you from fires while you are asleep. Thus, your alarms should be located between any sleeping persons and the rest of the house outside bedrooms or sleeping areas.

Home smoke alarm sales grew rapidly and the price fell. The battery operated home smoke alarm currently in place, saved thousands of lives, but several problems exist. Most of the homes without alarms have more than half of the fires; second, it is estimated that a third of the smoke alarms in place are not working, often due to failure to replace a worn out battery; and third, many homes do not have as many smoke alarms as are needed to protect the occupants properly. Alarm monitoring service is also available.

Steps involved in the installation of alarms: Install smoke alarms on every level of your home and in every bedroom or sleeping area to provide maximum protection, keep alarms clear of dust and debris by gently vacuuming the outside with your household vacuum‘s soft brush attachment or in accordance with the manufacturer‘s instructions.

Never use water, cleaners or solvents since they may damage the unit, Make sure the carbon monoxide alarms are installed at least low feet away from potential sources, such as your furnace, to reduce the number of nuisance alarms. Do not install carbon monoxide or smoke alarms where drafts from fans or air ducts can reach them. Drafts can blow smoke or CO away from the unit, preventing them from reaching the sensing chamber, Replace older carbon monoxide alarms after five years and old smoke alarms after 10 years or in accordance with the manufacturer‘s warranties.